Ez Routing View Screen; The Ez Routing Patch Bay Screen; Making Connections On The Ez Routing View Screen - Roland VS-2480 Owner's Manual

23—EZ Routing

EZ ROUTING VIEW Screen

The EZ ROUTING VIEW screen shows—and allows you to interconnect—all of your:
•
•
•
•
Track channel outputs
The area of the EZ ROUTING VIEW screen that includes the input jacks and
connectors is called the "patch bay"—it's identified by a dotted outline. The patch bay
has its own screen, described below.

Making Connections on the EZ ROUTING VIEW Screen

1. Use
2. Turn the TIME/VALUE dial to create the desired connection.
We've already described various EZ ROUTING VIEW connections in detail in other
parts of the VS-2480 Owner's Manual.
To learn how to route:
input channels to tracks for recording
track channels to tracks for bouncing
FX return channels to tracks for recording and bouncing
Patch bay connection descriptions are discussed in the following section.

The EZ ROUTING PATCH BAY Screen

You can jump to the PATCH BAY screen by holding down SHIFT and pressing EZ
ROUTING.
The primary purpose of the EZ ROUTING PATCH BAY screen is the connection of
analog input jacks and digital input connectors to the VS-2480's input channels. Input
connections are described in Chapter 9, which starts on Page 129.
292
input jacks and connectors
Aux busses
hard disk recorder tracks
FX return channels
Input jacks and
connectors
Input channel inputs
Input channel outputs
Hard disk recorder
track inputs
, , or to select the desired input or output connection. You can select:
• pairs of input channel inputs
• Aux bus outputs
• Track channel outputs
www.rolandus.com
• input channels
• Direct busses
• track channels
• input channel outputs
• Direct bus outputs
• FX return channel outputs
See:
Page 174
Page 198
Page 233
Roland VS-2480 Owner's Manual
The gray arrows at
the left edge of the
screen show the
direction in which
signal is flowing.
Direct busses
Aux busses
FX return
channel outputs