Recording Your Velocity Pad Performance On An Externally-Connected Sequencer - Roland MV-8000 Owner's Manual

Recording your velocity pad performance on an
externally-connected sequencer
If you turn Multi Timbre Sampler Mode on, your playing on the MV-8000's velocity
pads will be transmitted as MIDI messages. This means you can record your
performance on an externally-connected sequencer.
1.
Connect the MV-8000's MIDI OUT connector to your MIDI sequencer as
described in Quick Start "Preparing your equipment and making connections"
(p. 4).
AC Cord
2.
Press .
SYSTEM screen will appear.
3.
With the cursor located in the upper row of
icons, press
can select the MIDI icon and press
The MIDI screen will appear.
4. Turn the Multi Timbre Sample Mode parameter On in the MIDI screen.
With this setting, your playing on the velocity pads will be transmitted from the MIDI
OUT connector.
5.
Set the Pad Tx Channel parameter.
This specifies the MIDI OUT connector and channel used to transmit your playing on
the velocity pads.
6.
Press .
SEQUENCE screen will appear.
7.
Start recording on your external sequencer, and play the velocity pads.
Your velocity pad performance will be recorded on the external sequencer.
Using the MV-8000 with MIDI or V-LINK devices
MIDI IN
VGA OUT/MOUSE (OPTION)
MIDI OUT A/B
MIDI sequencer
(MIDI). Alternatively, you
.
You can't record performance
data on the MV-8000's own
internal sequencer while Multi
Timbre Sampler Mode is on.
You can set the Pad Tx
Channel parameter only if
Multi Timbre Sampler Mode is
on.
Multi Timbre Sampler Mode is
available only while the
following screens are
displayed.
• SEQUENCE screen
• EFFECTS screen
• MIXER screen
165