Add Audio Tracks Popup - Roland MV-8000 Owner's Manual

ADD AUDIO TRACKS popup

This lets you add audio tracks to the current song.
Explanation of each area
1. Number of Tracks
Specifies the number of tracks that will be added.
This lets you create more than one track at once.
Range: 1~8
2. Output Assign
Specifies the bus (audio signal route) to which audio
events recorded on the track will be output.
Range: Off, AUX 1~4, MLT 1~8, MLT 1/2~7/8
In order to select MLT 1~8 or MLT 1/2~7/8 and
send the audio to an external device, you will need
to install the MV8-OP1 (sold separately).
3. Track number and track name
Displays the number and name of the current track.
Press [F1 (Name)] to display the EDIT NAME
popup (p. 199), where you can edit the track name.
To access this screen
➜ ➜
•
➜
F-buttons
Name
Displays the EDIT NAME popup (p. 199), where you
can edit the name of the current track.
Execute
Adds the audio track(s).
The track(s) will be added below the current track in
the play list (sequence screen).
SEQUENCE
choose Add Audio Tracks
( )
247