Using R-Bus And Dif-At24 To Add A Midi Output - Roland MV-8000 Owner's Manual

Using the MV8-OP1 (Audio I/O Expansion) to connect external devices

Using R-BUS and DIF-AT24 to add a MIDI output

You can add an additional 16-channel MIDI output by connecting the DIF-AT24 (sold
separately) to the R-BUS connector.
1.
Connect the DIF-AT24 (sold separately) to the R-BUS connector.
Sound
Generator
DIF-AT24
MV8-OP1
(Audio I/O Expansion)
2.
Power-on the MV-8000.
3.
Press .
The SEQUENCE screen (p. 205) will appear.
4. Use (up/down) to select the MIDI
track that contains the performance data you
want to output.
The track you select will be the current track.
5.
Press (Track Param).
The TRACK PARAMETER (MIDI) popup (p. 208) will appear.
6. Set the Output MIDI parameter.
Select the MIDI connector and channel on which you want to transmit the performance
data. If you want to transmit MIDI data via the DIF-AT24, select R1~R16.
Value Output destination
A-1
: MIDI OUT A
A-16
B-1
: MIDI OUT B
B-16
R-1
: R-BUS (use MV8-OP1 and DIF-AT24)
R-16
MIDI IN
MIDI OUT
R-BUS
R-BUS
MV-8000
Channel
1
:
16
1
:
16
1
:
16
175