Quick Assign (Audio Phrase:divide) Screen - Roland MV-8000 Owner's Manual

QUICK ASSIGN (AUDIO PHRASE:DIVIDE) screen

When you set the Auto Divide parameter to On, here
you can assign divided audio phrases to pads.
Explanation of each area
1. Sample Name
Displays the name of the sample.
2. Sample Channel
Displays the number of channel of the sample
(Mono/Stereo).
3. Wave window
Displays the beginning of the divided sampled data
(waveform).
4. Pads
Indicates the state of the pads in the current pad
bank.
Indicate Status
An audio phrase is assigned to the pad.
Nothing is assigned.
An audio phrase will assign to the
enclosed pad.
5. Assign To Pad Bank
Selects the pad bank to which the sample will be
assigned.
Range: 1~32
To access this screen
➜
•
to On) ➜ (start sampling) ➜
sampling) ➜
F-buttons
Name
Displays the EDIT NAME popup (p. 199), where you
can edit the pad name.
Set All
Assigns the sample to the pad number 1 of the
specified pad banks.
When automatically assigning samples, a
confirmation message will appear if a pad to which
a sample is already assigned would be overwritten.
If the waveform was not divided even though Auto
Divide was on, [F4 (Preview)] (p. 360) will be
displayed.
EXIT
Returns to the SAMPLING / RE-SAMPLING screen
(p. 355) without assigning the sample data to a pad,
and displays the next sample data.
SAMPLING
➜ (Set the Auto Divide parameter
(stop
361