Using Data Of Other Formats; Importing Data From Your Computer Via Usb; To Start Communication With Your Computer - Roland MV-8000 Owner's Manual

Using data of other formats

Importing data from your computer via
USB
If your USB-equipped computer is connected to the USB connector on the MV-8000's
rear panel, you will be able to transfer data between the two devices. WAV files or
AIFF files saved on your computer can be loaded into the MV-8000 and used as
instruments or audio phrases.

To start communication with your computer

1.
Use a USB cable to connect the MV-8000 and your computer.
Refer to "Preparing your equipment and making connections (p. 4)" in Quick Start.
2. Press
The DISK/USB MENU screen (p. 329) will appear.
3. Press (USB), or use the cursor to select
the USB icon and press
The USB screen (p. 336) will appear.
4.
Press (Connect).
The display will ask "Save current project?"
F-button Action
Activates the USB connection without saving the current project.
(No)
Saves the current project, and then activates the USB connection.
(Yes)
Cancels the operation.
Communication between the MV-8000 and your computer will begin.
150
.
.
WAV files are the standard
format of two-channel PCM
audio files used by Microsoft
Windows.
When you connect the MV-
8000 to your computer via
USB, the standard USB driver
will be used.
Do not disconnect the USB
cable while communication
is enabled or data is being
transferred. If you do so,
communication will be
interrupted and the system
will be unable to operate
correctly, or the transferred
file may be damaged or
lost.
Once USB communication
begins, the only operation
possible on the MV-8000 will
be to stop USB communication
by pressing [F5 (Disconnect)].