Sampling / Re-Sampling Screen - Roland MV-8000 Owner's Manual

Production studio
Hide thumbs Also See for MV-8000:
Table of Contents

Advertisement

SAMPLING / RE-SAMPLING screen

Here you can perform sampling.
Explanation of each area
1. SAMPLING
Indicates the type of sampling.
Display
AUDIO PHRASE
PATCH
SAMPLING
2. Level meter
Indicates the level of the audio input signal. When
sampling, adjust this level so that the meter moves in
the region of -12~0 dB.
The sound will distort if the display reaches 0 dB
(clip indicator lit).
3. Sample Type
Specifies the number of channels that will be
sampled.
Value
Mono
Stereo
4. Routing
Indicates the sampled source and the effects that will
be used.
Input display
Explanation
area
Analog input (MIC/LINE or
ANALOG
PHONO)
COAXIAL
Digital input (coaxial)
OPTICAL
Digital input (optical)
R-BUS
Digital input (R-BUS)
MIX BUS
when Re-Sampling
Explanation
Audio phrase sampling
Patch sampling
Sample and save in the
sample folder
Explanation
Monaural (one channel)
Stereo (two channels)
To access this screen
The SAMPLING screen that appears is the same for
any type of sampling. The type of sampling is
shown in the title area.
• If the MV8-OP1 (sold separately) is not installed,
this will be fixed at Analog (the COAXIAL,
OPTICAL, and R-BUS icons are not displayed).
• Use the SYSTEM GLOBAL screen (p. 320) to
switch the input source.
• To Re-Sampling, press [F2 (Re-Sampling)].
5. Start Trigger
Specifies how sampling will begin.
Value
Explanation
Manual
Sampling will be started manually.
Sampling will be triggered by the
Level
input level.
Sampling will begin when you strike
Pad
a pad.
Sampling will begin when you play
Play
back the sequencer.
6. Level
Specifies the response level when using the input
level to start sampling.
Range:
1~6
The Level setting is used only when Start Trigger =
Level.
7. Stop Trigger
Specifies how sampling will stop.
Value
Explanation
Manual
Sampling will be stopped manually.
Sampling will stop after the number
Beat
of beats specified by the Length pa-
rameter.
Sampling will stop after the time
Time
specified by the Length parameter.
SAMPLING
(for audio phrase sampling)
(for patch sampling)
(for sampling)
355

Advertisement

Table of Contents
loading

Table of Contents