Sequence (Mixdown Mode) Screen - Roland MV-8000 Owner's Manual

SEQUENCE (Mixdown mode) screen

This is the Sequence screen in Mixdown mode.
Transport buttons
In the SEQUENCE (Mixdown mode) screen, the
transport buttons are used to create (record) the
mastering file.
PLAY
Plays the sequence. If you press this while the REC
indicator is blinking, mixdown will begin.
REC
Records. When you press this once, the indicator
(red) will blink, and you will be in mixdown-standby
mode. If you now press [PLAY], the indicator will
light steadily and mixdown will begin.
STOP
Stops sequencer playback or mixdown. If you
stopped mixdown, the message "Mixdown finished.
Go to Mastering?" will appear.
To access this screen
➜
•
➜
The screen that appears is essentially the same as
the Sequence screen when mixdown mode is Off
(the normal state).
F-buttons
Close
Stops the playback of the audio file and then closes
LISTEN AUDIO FILE popup.
MASTERING
➜ (turn on Mixdown mode)
339