Copy&Insert Popup - Roland MV-8000 Owner's Manual

SEQUENCE
COPY&INSERT popup
This inserts the data of the "In time -- Out time"
region or the marked data into the current time
location. Data at the insert-destination will not be
overwritten; it will move backward in time (i.e., later
in the song) by the corresponding distance.
Explanation of each area
1. To
Specifies the insert-destination time.
Range: 0001-01-000~9999-**-***
** will depend on the time signature you set.
2. To Track
Specifies the insert-destination track number.
Range: 1~136
To Track appears only if you are using SEQUENCE
EDIT.
3. Times
Specifies the number of times the data will be
inserted. The identical data will be inserted the
specified number of times.
Range:
1~255
4. Shift All Tracks / Shift All Notes
Specifies whether the data of other tracks / notes will
also be shifted backward in time following the
insert-destination point.
Range: Off, On
For details on Shift All Track and Shift All Notes
refer to Copying data and inserting it at another
location (Copy & Insert). (p. 96)
228
To access this screen
➜
• select a MIDI track as the current track
(
➜
or
➜
The parameters in the COPY&INSERT popup will
differ according to whether you access it from
PIANO ROLL EDIT or from SEQUENCE EDIT. In
this page we describe all the parameters that might
appear; ignore the ones that don't apply.
F-buttons
Execute
Executes the Copy&Insert operation.
➜ ➜
choose Copy&Insert
(
)
)