Midi Filter Screen - Roland MV-8000 Owner's Manual

MIDI FILTER screen

Of the MIDI messages received by the current part,
you can specify the messages for which reception will
be enabled.
Explanation of each area
1. Part number
The number of the currently selected part is
highlighted.
2. MIDI messages
Here you can specify the MIDI messages for which
reception will be enabled. Reception is enabled for
messages with a ✔ mark.
Param. Explanation
Program Change message re-
PC
ception
Bank Bank Select message reception
Pitch Bender message recep-
Bend
tion
Channel Aftertouch or Poly-
Aft phonic Aftertouch message re-
ception
Modulation message recep-
Mod
tion
Vol Volume message reception
Pan Pan message reception
Exp Expression message reception
Hold Hold 1 message reception
Phase lock switch. This pre-
cisely aligns the timing when
PhsL
simultaneously-sounded mes-
sages are received.
Velocity curve. Selects the ve-
locity curve by which velocity
values from your MIDI key-
Velocity
board etc. will be adjusted. If
Curve
you simply want to use the un-
modified velocity response of
your keyboard, turn this Off.
To access this screen
F-buttons
Range
Off, On (✔)
Off, On (✔)
Off, On (✔)
- (Off),
C (channel),
P (poly)
Off, On (✔)
Off, On (✔)
Off, On (✔)
Off, On (✔)
Off, On (✔)
Off, On (✔)
Off,
1 2
3 4
INSTRU-
MENTS
➜
•
If the PhsL (Phase Lock) is on, the part will sound
simultaneously after all the notes are ready to
sound. This means that in some cases, some time
may elapse from when a note message is received
until it sounds.
Instruments
Displays the INSTRUMENTS screen (p. 265).
MIDI Filter
Displays the MIDI FILTER screen (p. 267).
Library
Displays the PATCH LIBRARY screen (p. 268).
Patch Edit
Displays the PATCH EDIT screen (p. 269).
Menu
Displays the INSTRUMENTS MENU. Displayed
menu items are same as p. 266.
INSTRUMENTS
267