Roland MV-8000 Owner's Manual page 270

INSTRUMENTS
11. Velocity Sens Offset (Velocity sensitivity offset)
Applies an adjustment to the velocity sensitivity of
the entire part while maintaining the velocity
sensitivity of each patch as specified by the following
parameters.
• Filter Velo Curve Sens (Filter Velocity Curve
Sensitivity) (p. 292)
• Level Velo Curve Sens (Level Velocity Curve
Sensitivity) (p. 294)
Range: -63~0~+63
This setting is added to the velocity sensitivity
values of each partial. This means that (for example)
if the velocity sensitivity of a partial is already set to
+63 (maximum), setting this parameter to a positive
"+" value will cause no change in the sound.
12. Voice Priority
Specifies how notes will be prioritized when the
maximum polyphony (64 voices) is exceeded.
Value Explanation
The last-played voices will be given
priority; voices will be successively
Last turned off starting with the
first-played of the currently sound-
ing voices.
The highest-volume voices will be
given priority; voices will be succes-
Loud
sively turned off starting with the
(Loudest)
lowest-volume of the currently
sounding voices.
270
F-buttons and menu
Control
Displays the PATCH EDIT (CONTROL) screen (p.
271).
Solo/Porta (Solo/Portamento)
Displays the PATCH EDIT (SOLO/PORTAMENTO)
screen (p. 274).
Split
Displays the PATCH EDIT (SPLIT) screen (p. 273).
Library
Displays the PATCH LIBRARY screen (p. 268).
Partial Edit
Displays the PARTIAL EDIT screen (p. 276).
Menu
Displays the PATCH EDIT MENU.
Menu items
1. Patch Name
Displays the EDIT NAME popup (p. 199), where you
can edit the name of the current patch.
2. Save Patch
Displays the SAVE PATCH screen (p. 299).
3. Load Patch
Displays the LOAD PATCH screen (p. 298).