Chorus
This effect adds breadth to the sound, making it
"fatter."
1. Rate
Value: 0–100
This sets the chorus modulation cycle time.
2. Depth
Value: 0–100
This sets the chorus modulation depth.
3. Ch-R Modulation. (Right Channel Modulation Phase)
Value: NonInv, Inv
This is ordinarily set to NonInv. When set to Inv
(Invert), the modulation (rising and falling sound) in
the right channel is inverted against the left channel.
This gives an effect in which the modulation in the
left and right channels is reversed.
4. Effect Level (Effect Level)
Value: 0–100
This adjusts the chorus volume level.
5. Direct Level
Value: 0–100
This adjusts the volume level of the direct sound.
Other effect blocks
NS (Noise suppressor) (p. 404)
Enhan (Enhancer) (p. 403)
EQ (3-band equalizer) (p. 401)
Delay (p. 427)
Effect Block
431