Roland MV-8000 Owner's Manual page 323

4. Slider Mode / Knob Mode
As you switch screens or perform various operations,
the positions of the top panel sliders and knobs may
no longer match the actual values of the parameters
they are controlling. This setting specifies how the
sliders or knobs will operate in such cases.
Value Explanation
The value will not change until the slid-
er/knob position matches the actual
Null value. In order to control the value, you
must first move the slider/knob to the
actual value.
When you operate a slider/knob, the
Jump parameter will immediately change to
the corresponding value.
Moving the slider/knob will increase or
Relative decrease the value relative to the current
value.
5. Tap Tempo
Specifies the Tap Tempo function of the [BPM/TAP]
button.
Value Explanation
The Tap Tempo function will not be
Off
used.
The tempo will be set by the interval at
On
which you press [BPM/TAP].
6. Tap Resolution
Specifies the beat interval by which the tempo will be
set when you use the Tap Tempo function.
Value Explanation
Press [BPM/TAP] at quarter notes of
(120)
the tempo you want to set.
Press [BPM/TAP] at eighth notes of the
(240)
tempo you want to set.
Press [BPM/TAP] at 16th notes of the
(480)
tempo you want to set.
SYSTEM
323