Metronome Popup - Roland MV-8000 Owner's Manual

Production studio
Hide thumbs Also See for MV-8000:
Table of Contents

Advertisement

METRONOME popup

Here you can make metronome settings.
Explanation of each area
1. Mode (Metronome Mode)
Specifies when the metronome signal will be output.
Value
Explanation
Off
The metronome will not sound.
The metronome will sound only during
Rec Only
recording.
The metronome will sound during play-
Play&Rec
back and recording.
Always
The metronome will always sound.
2. Output (Metronome Output)
Specifies the output destination for the metronome
signal.
Value
Click
[Beep]
Part 1-16
MIDI A-1~A-16
MIDI B-1~B-16
MIDI R-1~R-16
3. Level
Specifies the volume of the metronome.
Range:
1~100~127
The Metronome Level parameter is valid only when
Metronome Output is set to Click or Beep.
Explanation
Output the internal metro-
nome sound (click).
Output the internal metro-
nome sound (beep).
Use an instrument part to
sound the metronome.
Transmit a note message
from MIDI OUT A.
Transmit a note message
from MIDI OUT B.
Transmit a note message
from R-BUS.
To access this screen
4. Accent Note
Specifies the note number for the strong beat (first
beat).
Range:
C-1~C4~G9
5. Accent Velocity
Specifies the velocity for the strong beat (first beat).
The Accent Note will be output with the specified
velocity.
Range:
1~100~127
6. Normal Note
Specifies the note number for the weak beats (other
than the first beat).
Range:
C-1~C3~G9
When using the metronome to play a drum set, you
can select a desired percussion instrument by
specifying the note number.
7. Normal Velocity
Specifies the velocity for the weak beats (other than
the first beat). The Normal Note will be output with
the specified velocity.
Range:
1~60~127
F-buttons
Close
Closes the METRONOME popup.
SEQUENCE
215

Advertisement

Table of Contents
loading

Table of Contents