Roland MV-8000 Owner's Manual page 363

Production studio
Hide thumbs Also See for MV-8000:
Table of Contents

Advertisement

partials are assigned to the pads.
9. Original Key
Specifies the basic pitch. When you play this key, the
sample will sound at its original pitch (the pitch at
which it was sampled).
When this note number is received, the sample will
play at the same pitch as when it was recorded.
Note numbers above or below this note number will
play the sample at correspondingly higher or lower
pitches.
10. Keyboard
Indicates how the note numbers are used.
Region
of used
Samples
note numbers
will be assigned
F-buttons
Name
Displays the EDIT NAME popup (p. 199), where you
can edit the pad name.
Preview
Auditions the sample you are assigning. While
auditioning, you can hold [F4 (Preview)] to hear.
Set
Assigns the sample data to the specified pad.
When assigning samples, a confirmation message
will appear if a pad to which a sample is already
assigned would be overwritten.
EXIT
Returns to the SAMPLING / RE-SAMPLING screen
(p. 355) without assigning the sample data to a pad.
SAMPLING
363

Advertisement

Table of Contents
loading

Table of Contents