Using The Pre-Installed Patches - Roland MV-8000 Owner's Manual

Sampling

Using the pre-installed patches

When shipped from the factory, the MV-8000's internal hard disk contains a variety of
patches ("pre-installed patches") that you will find convenient when creating songs,
such as drum kits and bass sounds. To use the pre-installed patches (p. 394), load them
in the same way as any other patches (Load Patch).
INSTRU-
MENTS
1.
Press .
The INSTRUMENTS screen (p. 265) will appear.
2. Move the
to load the patch.
The selected part number (the current part) will be highlighted.
3.
Press .
The MENU popup will appear.
4. Use (up/down) to select "Load Patch" and press
The LOAD PATCH screen (p. 298) will appear.
5. Make sure that the current drive is the MV-8000's internal hard disk, and use
(cursor) to select the "PATCHES" folder.
6. Press
The contents of the PATCHES folder will
appear.
7.
Use (up/down) to select a
folder and press
The patches are organized into folders by
their type. Select the folder containing the type of patches you want to load, and press
the right cursor button.
The contents of the selected folder (patch data) will appear.
8.
Move the
9. Press (Execute).
The patch will be loaded into the part you specified.
46
(up/down) to the instrument part (1~16) into which you want
(right).
(right).
(up/down) to the patch that you want to load.
.
For details, refer to LOAD
PATCH screen (p. 298) in
the owner's manual.