Recover Project From Cd Popup - Roland MV-8000 Owner's Manual

PROJECT

RECOVER PROJECT FROM CD popup

Here you can recover (restore) a backed-up project
from CD into the MV-8000 with the name you
specify.
Explanation of each area
1. New Project on Hard disk
Specify a new project name when recovering
backed-up data to the hard disk.
318
To access this screen
➜ (move the cursor to the upper row of
•
icons) ➜
F-buttons
History
You can recall (and re-input) up to the ten most
recent names you input in the EDIT NAME popup
since turning on the power. Selects the name at the
cursor in the history list then press [ENTER].
Insert Space
Inserts a space at the cursor location.
Delete
Deletes the character at the cursor location.
Characters at the right of the cursor will be moved
forward to fill the gap.
A➜a/a➜A (switch character case)
Switches the character at the cursor location between
uppercase and lowercase.
Execute
The project on CD will be saved onto the MV-8000's
hard disk, and will become the current project. The
SEQUENCE screen (p. 205) will then appear.
If the display indicates "That name already exists"
A project with the name you input in the PROJECT
NAME screen already exists in the drive. Please
specify a different name.
The internal hard disk is the only available
save-destination for this data.