Kit Midi - Roland V-Drums TD-27 Data List

Drum sound module

Hide thumbs Also See for V-Drums TD-27:

Reference manual (67 pages)

Midi implementation manual (52 pages)

Quick start manual (30 pages)

Table Of Contents

Table of Contents

DRUM KIT

KIT MIDI

Specify the MIDI messages that are transmitted and received by a pad when a MIDI device is connected to this unit.

Parameter

[F1] button (NOTE tab)

Note No.

[F2] button (GATE tab)

Gate Time

[F3] button (MIDI CH tab)

MIDI Channel

MIDI note numbers transmitted and received by the hi-hat

Item

HI-HAT OPEN <BOW>

HI-HAT OPEN <EDGE>

HI-HAT CLOSE <BOW>

HI-HAT CLOSE <EDGE>

HI-HAT PEDAL

MIDI note numbers transmitted and received by the snare

Parameter

SNARE <HEAD>

SNARE <RIM>

SNARE <BRUSH>

SNARE <XSTICK>

When setting multiple pads to the same note number

When playing the internal sound generator of the TD-27, if an incoming note number is assigned to more than one pad, that note plays the

instrument of the pad with the lowest trigger input number. If the same note number is assigned to both the head and the rim, the head

instrument is sounded.

ME MO

An asterisk "*" appears at the right of the note number for trigger inputs that are not sounded.

Example)

Note number "38 (D 2)" is set for the head and rim of trigger input SNARE and the head of trigger input TOM 1. In this case, when note number 38 (D2) is

received, the instrument assigned to the head of trigger input SNARE is played.

About the gate time

Percussion sound modules normally produce sound only in response to "Note on" messages, and ignore "Note off" messages. However

general-purpose sound modules or samplers do receive the note-off messages that are transmitted and respond by turning off the sound.

Since gate time is normally not necessary for a percussion sound module, this is set to the minimum value when the unit is shipped from the

factory. If a note-off message is received while the sound module has this setting, it is received as an extremely brief note that has almost no

time to be heard, and is nearly inaudible. (Alternatively, it is possible that this could be heard as an unwanted noise.) To avoid this, specify the

note duration of the MIDI performance data that is produced when you strike each pad.

* If the same note number is sounded again in an overlapping manner, a note-off is transmitted before transmitting note-on, even if it is within the

gate time.

Value

0 (C -)–127 (G 9)

OFF

0.1– 8.0 s

CH1–CH16

GLOBAL

Explanation

MIDI note number transmitted and received by open hi-hat (bow, edge)

MIDI note number transmitted and received by closed hi-hat (bow, edge)

MIDI note number transmitted and received by pedal hi-hat

Explanation

MIDI note number transmitted and received by head shot and rim shot

MIDI note number transmitted and received by brush sweep

MIDI note number transmitted and received by cross stick

Explanation

MIDI note number transmitted and received by each pad

Note messages are not transmitted or received

Duration of the note transmitted by each pad

MIDI channel used to transmit or receive note messages for each pad

Transmitted and received on the transmit/receive channel specified in SYSTEM (p. 38).

Table of Contents

Show Quick Links

Hide quick links:

Table of Contents

Kit Midi - Roland V-Drums TD-27 Data List

KIT MIDI

Hide quick links:

Related Manuals for Roland V-Drums TD-27

Related Content for Roland V-Drums TD-27

Table of Contents