Appendix; New And Extended Functions; Firmware Version 4.7 Sp9; A.1 New And Extended Functions - Siemens Sinamics G110M Operating Instructions Manual

Appendix

A.1

New and extended functions

A.1.1

Firmware version 4.7 SP9

Table A- 1 New functions and function changes in firmware 4.7 SP9
Function
1 Support of PM240-2 FSG Power Modules
2 Support of PM240-2 Power Modules in push-through technology, frame
sizes FSD ... FSF, for the following voltages:
3 AC 200 V ... 240 V
•
3 AC 380 V ... 480 V
•
3 AC 500 V ... 690 V
•
3 Support of PM240-2 Power Modules, 3 AC 500 V ... 690 V, frame size
FSD with reduced power 3 kW ... 7.5 kW
4 Shortened switch-on time for PM330 Power Modules
5 Expansion of the support for 1FP1 synchronous-reluctance motor with the
following inverters:
SINAMICS G110M
•
SINAMICS G120D
•
SINAMICS G120 with CU240B-2 or CU240E-2 Control Unit
•
A PM240-2 Power Module is required to operate a 1FP1 synchronous-
reluctance motor with SINAMICS G120
6 Support of 1FP3 synchronous-reluctance motors
A PM240-2 Power Module is required to operate a 1FP3 synchronous-
reluctance motor along with a selective release from SIEMENS
7 Support of 1LE5 induction motors
8 The inverter supports forming the PM330 Power Module DC link capaci-
tors
Distributed converter for SIMOGEAR geared motors
Operating Instructions, 09/2017, FW V4.7.9, A5E31298649B AH
SINAMICS
G120
- - ✓ ✓ ✓ ✓
- - ✓ ✓ ✓ ✓
- - ✓ ✓ ✓ ✓
- - ✓ - - -
✓ - ✓ ✓ ✓ -
- - ✓ - - -
- ✓ ✓ ✓ ✓ ✓
- - ✓ - - -
A
G120D
- - -
- - -
- - -
- - -
✓ - -
- - -
- - -
- - -
347