Commissioning; Commissioning Guidelines - Siemens Sinamics G110M Operating Instructions Manual

Commissioning

5.1

Commissioning guidelines

We recommend the following procedure:
1. Define the requirements of
your application placed on
the drive.
→ (Page 105) .
2. Reset the converter when
required to the factory
setting.
→ (Page 113) .
3. Check whether the factory
setting of the converter is
appropriate for your
application.
If not, start with the basic
commissioning.
→ (Page 105) .
4. Check whether you need to
adapt the commissioning
DIP switches.
→ (Page 90).
5. If necessary, adapt the
communications interface in
the converter.
→ (Page 143) .
6. If necessary, set further
functions in the converter.
→ (Page 139) .
7. Save your settings.
→ (Page 283) .
You have fully commissioned the converter.
Distributed converter for SIMOGEAR geared motors
Operating Instructions, 09/2017, FW V4.7.9, A5E31298649B AH
→ (Page 116) .
5
103