List Of Alarms And Faults - Siemens Sinamics G110M Operating Instructions Manual

Alarms, faults and system messages

8.7 List of alarms and faults

Parameter
p2126[0 ... 19]
p2127[0 ... 19]
You will find details in function diagram 8075 and in the parameter description of the List
Manual.
8.7 List of alarms and faults
Axxxxx Alarm
Fyyyyy: Fault
314
Description
Setting the fault number for the acknowledgement mode
Selection of the faults for which the acknowledgement type should be changed.
You can modify the acknowledgement type for up to 20 different fault codes.
Setting, acknowledgement mode
Setting the acknowledgement type for the selected fault
1: Acknowledgement only using POWER ON
2: IMMEDIATE acknowledgement after removing the fault cause
Distributed converter for SIMOGEAR geared motors
Operating Instructions, 09/2017, FW V4.7.9, A5E31298649B AH