Siemens Sinamics G110M Operating Instructions Manual page 212

Advanced commissioning
6.13 Safe Torque Off (STO) safety function
Procedure
Proceed as follows to create the acceptance documentation for the drive using STARTER:
1. In STARTER, select "Create acceptance documentation":
STARTER has templates in German and English.
2. Select the suitable template and create a report for each drive of your machine or system:
– Template for the machine documentation:
– Report of the settings for the basic functions, as of firmware version V4.4:
3. You load the created reports for archiving and the machine documentation for further
processing:
4. Archive the reports and the machine documentation.
You have generated the documents to accept the safety functions.
212
de_G120x_Dokumentation_Maschine: German template.
en_G120x_Documentation_machine: English template.
de_G120x_Basic_V4.4...: German report.
en_G120x_Basic_V4.4...: English report.
Acceptance tests for the safety functions (Page 363)
Distributed converter for SIMOGEAR geared motors
Operating Instructions, 09/2017, FW V4.7.9, A5E31298649B AH