Siemens Sinamics G110M Operating Instructions Manual page 44

Installation
4.1 Mechanical Installation
To ensure that the correct motor is selected the following sources of information should be
consulted:
● The relevant system catalog, for example the SINAMICS G120 catalog.
● The relevant motor catalog.
● The Siemens "Configurator" online software application for dimensioning motors
(Siemens motor configurator
(https://eb.automation.siemens.com/goos/catalog/Pages/ProductData.aspx?catalogRegio
n=WW&language=en&nodeid=10028832&tree=CatalogTree&regionUrl=%2F&autoopen=
false&activetab=product#topAnch&activetab=config&))
The "Configurator" tool allows the user to precisely configure a motor with all the accessories
and options that are required, then generate dimensional data, including 2D and 3D CAD
models, which can be downloaded to the users local system.
The figure below shows an example of the type of data available.
44
Distributed converter for SIMOGEAR geared motors
Operating Instructions, 09/2017, FW V4.7.9, A5E31298649B AH