Figure 24: Mx2020 Extended Cable Managers - Juniper MX2020 Hardware Manual

Copyright © 2015, Juniper Networks, Inc.
The extended cable management system provides additional support to route and secure
a large number of cables away from the front of the MPCs, and MICs (see
Figure 24 on page 49).
The extended DC cable management system provides additional support to route and
secure a large number of cables away from the rear of the PDMs (see
Figure 24 on page 49).
You can use cable strips or other ties to gently secure the cables in the upper and lower
extended cable managers. To secure the cables in place, loop the tie through the cable
anchor and secure the tie.

Figure 24: MX2020 Extended Cable Managers

Front upper
Front lower
Rear DC PDM
Chapter 5: Cable and Rack Management
49