Figure 102: Installing Winch Mount Bracket To Rack Rails - Juniper MX2020 Hardware Manual

Copyright © 2015, Juniper Networks, Inc.
NOTE: A minimum of 38 in. (96.5 cm) of clearance is required to roll the
chassis sideways.
NOTE: A minimum of 42 in. (106.7 cm) of circular space is required to
rotate the chassis.
NOTE: The router transport kit handles can be removed to accommodate
aisle width.
Install the winch mount bracket to the rear rack rails using the captive screws, and
3.
tighten (see Figure 102 on page

Figure 102: Installing Winch Mount Bracket to Rack Rails

Adjust the height of the router by turning the handles clockwise until the router
4.
transport platform is aligned with the surface of the mounting shelf and slightly higher
than the mounting shelf (see
231).
Figure 103 on page 232).
Chapter 18: Installing the Router
231