Cooling System; Mx2020 Cooling System Description; Figure 26: Removing Fan Tray; Chapter 6 Cooling System - Juniper MX2020 Hardware Manual

3d universal edge router

Hide thumbs Also See for MX2020:

Table of Contents

Cooling System

MX2020 Cooling System Description on page 53

MX2020 Fan Tray LED on page 56

The cooling system consists of the following components:

Fan tray—MX2000-FANTRAY

Lower Fan Tray Air filter—MX2020-FLTR-KIT-S

Air baffle—MX2000-UPR-BAFFLE

The cooling system components work together to keep all router components within the

acceptable temperature range. The router has four fan trays, two trays located at the

top, and two trays located at the bottom of the router that install horizontally. Each fan

tray contains six fans. These are labeled

fan trays are interchangeable and are hot-insertable and hot-removable.

Each fan tray has a double safety latch, so the fan tray cannot be removed in one swift

motion, (see

Figure 26 on page

and are 172-mm in diameter. The