Removing The Mx2020 Lower Extended Cable Manager; Figure 197: Removing The Extended Upper Cable Manager - Juniper MX2020 Hardware Manual

MX2020 3D Universal Edge Router Hardware Guide

Removing the MX2020 Lower Extended Cable Manager

444

Figure 197: Removing the Extended Upper Cable Manager

To remove the lower MX2020 extended cable manager:
Attach an electrostatic discharge (ESD) grounding strap to your bare wrist, and connect
1.
the strap to one of the ESD points on the chassis.
To remove the cover, loosen the two captive screws on the extended cable manager
2.
cover. Set the extended cable manager cover aside.
Remove the eight screws that secure the extended cable manager to the chassis as
3.
shown in Figure 198 on page
Pull the extended cable manager away from the chassis.
4.
19
445.
Copyright © 2015, Juniper Networks, Inc.