Replacing The Mx2020 Craft Interface; Figure 203: Removing A Cb-Re - Juniper MX2020 Hardware Manual

MX2020 3D Universal Edge Router Hardware Guide
Related
Documentation

Replacing the MX2020 Craft Interface

450
Place the CB-RE on the antistatic mat or into an antistatic bag.
7.
If you are not replacing the CB-RE immediately, install a blank panel over the empty
8.
slot.

Figure 203: Removing a CB-RE

0
Preventing Electrostatic Discharge Damage to an MX2020 Router on page 558
Effect of Taking the MX2020 Host Subsystem Offline on page 402
Taking an MX2020 Host Subsystem Offline on page 401
Installing an MX2020 CB-RE on page 301
1. Removing the MX2020 Craft Interface on page 451
Installing the MX2020 Craft Interface on page 451
2.
19
Copyright © 2015, Juniper Networks, Inc.