Installation Overview; Installing An Mx2020 Router Overview; Chapter 15 Installation Overview - Juniper MX2020 Hardware Manual

3d universal edge router

Hide thumbs Also See for MX2020:

Table of Contents

Installation Overview

Installing an MX2020 Router Overview on page 189

Tools and Parts Required to Unpack the MX2020 Router on page 190

Tools Required to Install the MX2020 Router Using a Pallet Jack on page 191

Tools Required to Install the MX2020 Router Using a Router Transport Kit on page 191

Tools and Parts Required for Connecting the MX2020 Router to Power on page 192

Tools and Parts Required to Maintain the MX2020 Hardware Components on page 193

Tools and Parts Required for MX2020 Router Connections on page 193

To install the MX2020 router:

Prepare your installation site. See:

Overview of Preparing the Site for the MX2020 Router on page 103

Review the safety guidelines. See:

General Safety Guidelines for Juniper Networks Devices on page 555

Unpack the router and verify the parts. See:

Unpacking the MX2020 Router on page 195

Verifying the MX2020 Parts Received on page 199

Unpacking the Router Transport Kit on page 201

Install the mounting hardware. See:

Installing the MX2020 Mounting Hardware for a Four-Post Rack or Cabinet on

Remove all components. See:

Removing Components from the MX2020 Router Chassis Before Installing It In a

Rack on page 209

Install the router into the rack. See:

Installing a MX2020 Router Using a Pallet Jack Overview on page 219