Clear Dot1X - Cisco 3020 - Catalyst Blade Switch Command Reference Manual

clear dot1x

clear dot1x
Use the clear dot1x privileged EXEC command to clear IEEE 802.1x information for the switch or for
the specified port.
Syntax Description
all
interface interface-id
Defaults
No default is defined.
Command Modes
Privileged EXEC
Command History Release
12.2(25)SEE
12.2(25)SEF
Usage Guidelines You can clear all the information by using the clear dot1x all command, or you can clear only the
information for the specified interface by using the clear dot1x interface interface-id command.
Examples This example shows how to clear all IEEE 8021.x information:
Switch# clear dot1x all
This example shows how to clear IEEE 8021.x information for the specified interface:
Switch# clear dot1x interface gigabithethernet0/21
You can verify that the information was deleted by entering the show dot1x privileged EXEC command.
Related Commands Command
show dot1x
Cisco Catalyst Blade Switch 3020 for HP Command Reference
2-36
clear dot1x {all | interface interface-id}
Clear all IEEE 802.1x information for the switch.
Clear IEEE 802.1x information for the specified interface.
Modification
This command was introduced.
This command was introduced.
Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands
Description
Displays IEEE 802.1x statistics, administrative status, and operational
status for the switch or for the specified port.
OL-8916-01