Caring For Your Oh1; Keep Your Oh1 Clean - Polar Electro Polar OH1 User Manual

Hide thumbs Also See for Polar OH1:

Table of Contents

To charge with your computer, just plug

your OH1 to your computer, and at the

same time, you can have it synced it with

FlowSync.

1Place the sensor into the USB

adapter with the lens facing up so

that the contacts on the sensor and

USB adapter meet (picture 1).

2Plug the USB adapter into a

computer USB port or USB power wall

outlet (picture 2).

Caring for your OH1

Like any electronic device, the Polar OH1 should be kept clean and treated

with care. The instructions below will help you fulfill the guarantee

obligations, keep the device in peak condition and avoid any issues in

charging or syncing.

Wipe any dirt or mud off OH1 after each training session with a soft towel.

Keep the OH1 and OH1 USB adapter charging contacts clean to ensure

smooth charging and syncing.

Before charging, make sure there's no moisture, hair, dust or dirt on the OH1

or OH1 USB adapter charging contacts. Gently wipe off any dirt and blow off

any dust. Do not use any sharp tools for cleaning to avoid scratching.

Table of Contents