Viewing The Status Of A Tftp Transfer - Avaya P580 User Manual

Chapter 2
CLI Command

Viewing the Status of a TFTP Transfer

Web Agent
Procedure
CLI Command
2-42
To copy files, use the following CLI command in Enable mode:
# copy running-config +
* Note: Entering a + sign lists all of the applicable options for the copy
running-config command
After you have copied the startup configuration or other files to a TFTP
server, you can use either the Web Agent or the CLI to check the status of
the TFTP transfer to ensure that files copied correctly.
To view the status of a TFTP transfer using the Web Agent:
1. Select File Management from the System > Configuration >
Configuration Files group in the navigation pane. The Configuration
File Management Web page opens
2. Select Status from the Get Status of Most Recent TFTP Copy field. A
status message displays in the Status pane.
While doing a TFTP transfer using the CLI, the status, either successfully
transferring or an error condition, is immediately returned.
* Note: You cannot view the status of a TFTP transfer done using the
CLI from the Get Status of Most Recent TFTP Copy field on
the Web Agent.
> show startup-config
User Guide for the Avaya P580 and P882 Multiservice Switches, v6.0
(Figure 2-19).