ACLI quick reference
ACLI commands listed by mode
Use the table in this section to determine the ACLI mode required for a command from the
list.
In column 1, commands are grouped by function, in alphabetical order, and supported modes
that apply to the command group appear in column 2. Where more than one mode is listed for
a group of commands, you can access a command in the group from any of the modes listed
for the group.
Table 4: ACLI commands and modes
adac
asset-id <string>
asset-id stack <string>
asset-id unit <1-8> <string>
no asset-id
no asset-id stack
no asset-id unit <1-8>
default asset-id
default asset-id stack
default asset-id unit <1-8>
auto-pvid
no auto-pvid
autosave
no autosave
default autosave
autotopology
banner
boot
boot default
boot unit <1-8>
brouter port <port> vlan <vid> subnet <ipaddr/mask> [routing
enable]
84
Fundamentals
ACLI commands
Comments? infodev@avaya.com
ACLI mode
Config
Config
Config
Config
Config
Config
Config, PrivExec
Config
December 2011