License Key Cli Commands - Avaya P332GT-ML Installation And Configuration Manual

1 Enter the acquired Routing License Key into the P330-ML module using the
set license CLI command.
set license [module] [license] [featureName]
2 Reset the module.
3 Check that the license is activated using the CLI.
Use the show license CLI command.

License Key CLI Commands

In order to...
Configure the feature license
Display the feature license
Display the switch identity
required for acquiring a license
Avaya P332GT-ML User's Guide
where:
module - P330-ML module number (the location of the device in the
stack)
license - license code
featureName - routing
and press Enter.
Chapter 12 Avaya P330 Layer 3 Features
Use the following command...
set license
show license
show module-identity
91