Removing The Piston - APRILIA SCARABEO 500 2008 Service Station Manual

SCARABEO 500
Maximum clearances allowed after use: 0.10
mm
If clearances measured exceed the maximum val-
ues specified in the table, the piston should be
replaced with a new one.

Removing the piston

- Install piston and pin onto the connecting rod,
with the piston arrow aligned facing the exhaust.
- Fit the pin snap ring in the specific tool, with the
opening in the position indicated on the tool.
S = left
D = right
- Set the snap ring into its position with the punch.
Engine
ENG - 177