Maintenance
Characteristic
Spark plug electrode gap
0.7 - 0.9 mm
Locking torques (N*m)
Spark plug 12 ÷ 14
Hub oil
Check
NOTE
USE RECOMMENDED OIL ONLY. REFER TO THE RECOMMENDED PRODUCTS TABLE.
•
Ride a few kilometres until the regular working temperature is reached, then stop the engine.
•
Park the vehicle on firm and level
ground.
•
Rest the vehicle on its centre stand.
•
Unscrew and take out the measuring cap-dipstick «1».
•
Clean the area in contact with oil with a clean cloth.
•
Screw the cap-dipstick «1» fully down into its tube.
•
Extract the cap-dipstick «1» again and read the oil level on the cap-dipstick:
•
The level is correct when it reaches approximately the first notch above the little round
mark.
MAX = Maximum level
MIN = Minimum level
•
Top-up if necessary.
TOP-UP
MAIN - 46
SCARABEO 500