Suspensions
Removing the fork legs
To remove the stanchions it is necessary to re-
move the sump guard, lift the front wheel using a
scissor lift, disconnect the front brake callipers, re-
move the wheel and the mudguard. Then proceed
as described:
THE FOLLOWING OPERATIONS REFER TO A
STANCHION BUT APPLY TO BOTH.
(IF APPLICABLE)
•
Unscrew the fixing screw of the ABS
wiring harness plate and remove it.
•
Undo the fixing screw of the ABS sen-
sor and remove it.
•
Unscrew the two locking screws of the
stanchion on the lower triple tree
clamp.
•
Unscrew the two locking screws of the
stanchion on the upper triple tree
clamp.
SUSP - 134
TUAREG 660