Maintenance
•
Pour the indicated quantity of recom-
mended transmission oil through the fill
opening.
•
Screw and tighten the measuring cap-
dipstick «1».
•
Start the engine and let it run for sev-
eral minutes. Stop the engine and let it
cool down.
•
Check the transmission oil level again.
Recommended products
AGIP GEAR SYNTH SAE 75W-90 Gearbox oil
API GL4, GL5
Characteristic
Transmission oil
250 cm³ (15.3 cu.in)
Air filter
Remove the filtering element from the vehicle for
cleaning.
Removal
•
Rest the vehicle on its centre stand.
•
Undo and remove the nine screws «1».
•
Remove the filter casing cover with the filtering element
•
Check the filtering element; replace it if required.
CAUTION
CLEAN THE FILTERING ELEMENT WITH A JET
OF COMPRESSED AIR.
DO NOT OIL THE FILTERING ELEMENT OR OIL
MAY GET INTO THE BELT HOUSING AND
DAMAGE IT OR CAUSE IT TO SLIDE.
MAIN - 48
SCARABEO 500