Removing The Oil Sump Guard; Removing The Drive Chain Guards; Rear Suspension - APRILIA PEGASO 650 STRADA TRAIL 2005 Use And Maintenance Book

Table of Contents

Advertisement

1

REMOVING THE OIL SUMP GUARD

C a r e f u l l y
r e a d
p a g e
(MAINTENANCE).
WARNING
Wait until the engine and the exhaust
silencer have completely cooled down.
u
Position the vehicle on the stand, see
page 55 (POSITIONING THE VEHICLE
ON THE STAND).
u
Unscrew and remove the two screws (1).
CAUTION
H a n d l e t h e p l a s t i c a n d p a i n t e d
components with care to avoid scraping
or damaging them.
u
Remove the oil sump guard (2).
NOTE
If the deadening material inside
the oil sump guard (2) is deteriorated,
contact an aprilia Authorised Dealer to
have it changed.
70
use and maintenance Pegaso 650 I.E. STRADA - TRAIL
1
2
REMOVING THE DRIVE CHAIN
GUARDS
5 7
Carefully read 57 (MAINTENANCE).
u
Position the vehicle on the stand, see
page 55 (POSITIONING THE VEHICLE
ON THE STAND).
u
Unscrew and remove the two screws (1).
u
From the opposite side, unscrew and
remove the screw (2).
WWW.PlandeGraissage.ORG
1
2

REAR SUSPENSION

The rear suspension consists of a spring-
shock absorber unit, fixed to the frame by
means of a uni-ball and to the swinging
arm by means of lever systems.
For the setting of the vehicle track
alignment, the shock absorber is
provided:
– with a screw adjuster (1) for the adjustment
of the hydraulic rebound damping;
– with an adjuster ring nut (2) for the
adjustment of the spring preload.
2
1

Advertisement

Table of Contents
loading

Table of Contents