APRILIA SCARABEO 500 2008 Service Station Manual page 166

Engine
- Tighten the flywheel lock nut to the prescribed
torque.
Locking torques (N*m)
Flywheel fixing nut 115 - 125
- Fit the chain guide slider retention plate by tight-
ening the 3 screws to the prescribed torque.
NOTE
BEFORE TIGHTENING THE SCREWS, MOVE
THE STARTING RING GEAR UNTIL IT MAKES
CONTACT WITH THE CRANKCASE AND
CHECK THAT IT IS FREE TO ROTATE ANTI-
CLOCKWISE.
Locking torques (N*m)
Chain guide slider plate fixing screws 3 ÷ 4
Refitting the starter motor
- Check that the O-ring is in good conditions and
lubricate it.
- Fit the starter motor.
- Tighten the 2 fixing screws to the prescribed tor-
que.
Locking torques (N*m)
Starter motor screws 11 ÷ 13
Cylinder assy. and timing system
- Remove the external and internal transmission
covers.
ENG - 166
SCARABEO 500