APRILIA SCARABEO 500 2008 Service Station Manual page 226

Engine
- Hold the screw in one position and operate the
nut until the static part of the sealing is completely
removed.
- Remove the extractor with the static part of the
overall sealing.
montaggio
OVERALL SEALING FITTING
CAUTION
CLEAN ALL THE COMPONENTS CAREFULLY.
CAUTION
LUBRICATE THE ROTOR SHAFT WITH OIL.
- Fit the tie rod screwing it in the rotor shaft.
CAUTION
FINGER TIGHTEN THOROUGHLY.
- Place the overall sealing on the shaft.
ENG - 226
SCARABEO 500