Braking system
Rear brake pump - combined
Removal
•
Remove the legshield.
•
Undo and remove the three screws fix-
ing the antitheft control unit.
•
Detach the antitheft control unit but
keep it connected to the wiring.
•
Drain the braking system completely.
•
Undo and remove the two screws «1»
and the bleed valve «2».
•
Protect the three brake pipes to pre-
vent brake fluid spilling.
•
Undo and remove the two screws «3»
fixing the distribution mechanism.
•
Remove the distribution mechanism.
NOTE
MARK THE BRAKE PIPES TO PREVENT IN-
CORRECT REFITTING.
NOTE
UPON REFITTING PURGE THE AIR OF THE
BRAKING SYSTEM.
NOTE
ALWAYS USE NEW SEAL GASKETS FOR THE
BRAKE PIPE UNION.
BRAK SYS - 292
SCARABEO 500