SCARABEO 500
•
Slide off the pin.
•
Remove the spring.
•
Slide off the brake pads.
CAUTION
AFTER REMOVING THE PADS, DO NOT OP-
ERATE THE BRAKE CONTROL LEVER; OTH-
ERWISE, THE CALLIPER PLUNGER COULD
GO OUT OF ITS SEAT RESULTING IN BRAKE
FLUID LEAKAGE.
CAUTION
ALWAYS REPLACE BOTH PADS AND MAKE SURE THEY ARE CORRECTLY POSITIONED IN-
SIDE THE CALLIPER.
•
Check the thickness of the friction ma-
terial. Replace if the thickness is below
the minimum value.
Characteristic
Minimum thickness of the friction material
1.5
Braking system
BRAK SYS - 287