APRILIA SCARABEO 500 2008 Service Station Manual page 190

Engine
- Tighten the 3 side screws to the prescribed tor-
que.
Locking torques (N*m)
Head fixing screws 10 - 12
- Fit the coolant temperature sensor with the wash-
er and tighten it to the prescribed torque.
CAUTION
FAILURE TO OBSERVE THE LOCKING TOR-
QUE CAN DAMAGE THE SENSOR.
Locking torques (N*m)
Coolant temperature sensor 10 - 12
- Fit the spark plugs and tighten them to the prescribed torque.
Locking torques (N*m)
Spark plug 12 ÷ 14 Nm
- Fit the timing control chain on the crankshaft ob-
serving the initial direction of rotation.
- Fit the tensioner pad with the relevant spacer,
tightening the fixing screw to the prescribed tor-
que, using the recommended product.
Recommended products
Loctite 243 Medium strength threadlock
-
Locking torques (N*m)
Tensioner pad fixing screw 10 - 14
- Fit the pins and the rocking levers operating on
the flywheel side.
- Lubricate the 2 rocking levers through the holes
at the top.
ENG - 190
SCARABEO 500