SCARABEO 500
Engine
- Fit the washer and the nut on the crankshaft.
- Tighten the guide bushing which is part of the
flywheel locking tool as far as it will go and then
loosen it 1/4 of a turn.
NOTE
FAILURE TO OBSERVE THIS RULE CAUSES
THE GUIDE ON THE FLYWHEEL TO GET
LOCKED.
Specific tooling
020472Y Flywheel lock wrench
- Align the 2 holes of the magneto flywheel with the
seat on the crankcase to fit the specific tool.
- Fit the specific tool checking that the pins are
perfectly inserted into their positions.
Specific tooling
020472Y Flywheel lock wrench
ENG - 165