SCARABEO 500
•
Place the sleeve in a vice.
CAUTION
THE WHEEL HOLDER STEM SLEEVE UNIT
CONTAINS OIL. DO NOT TURN IT OVER OR
TILT IT TOO MUCH WHEN REMOVING IT.
•
Lower the cap «1» until the Seeger ring
«2» can be removed.
•
Remove the Seeger ring «2».
•
Remove the cap «1» together with the
O-ring.
•
Remove the spring«3» and wait some
minutes so that the oil deposited on it
drips off.
Suspensions
SUSP - 269