APRILIA SCARABEO 500 2008 Service Station Manual page 151

SCARABEO 500
Engine
- Temporarily fit the plug for the distribution timing
check hole and the engine oil filler cap/dipstick.
- Fit the blow-by recovery duct using a new O-ring.
- Tighten the screw to the prescribed torque.
Locking torques (N*m)
Blow-by scavenge duct fixing screws 3 - 4
- Fit the spring and the by-pass piston on the fly-
wheel cover.
NOTE
LUBRICATE THE BY-PASS VALVE.
- Oil pressure sensor feeding duct.
- Oil vapour decantation chamber drainage.
ENG - 151