APRILIA SCARABEO 500 2008 Service Station Manual page 135

SCARABEO 500
- Fit the plastic external transmission cover.
- Tighten the 4 fixing screws to the prescribed tor-
que.
Locking torques (N*m)
External transmission cover screws 7 ÷ 9
End gear
Removing the hub cover
- Drain the rear hub oil through the oil drainage
plug located under the engine.
- Remove the 7 fixing screws. Remove the hub
cover and the relevant gasket.
Removing the wheel axle
- Remove the transmission shaft.
- Remove the wheel axle with gear.
Engine
ENG - 135