SCARABEO 500
- Fit the return spring and load it by about 3/4 of a
turn.
- Turn the engine to move the references to the top
as shown in the figure (intake end).
- Fit the valve-lifter mass retainer cover.
- Tighten the fixing screw to the prescribed torque, using the recommended product.
NOTE
BELL TIMING IS ENSURED BY THE BALANCE WEIGHT MASS FIXING SCREW HEAD.
Recommended products
Loctite 243 Medium strength threadlock
-
- Check that the decompression mass is free and
that it is pulled by the spring.
Locking torques (N*m)
Screw fixing the valve-lifter retaining cover 30
- 35
Engine
ENG - 193