Atm Expansion Sub-Modules; Safety Information - Avaya P333T User Manual

Appendix B Specifications

ATM Expansion Sub-modules

There are three Avaya P330 ATM Expansion Sub-modules:
• X330-OC12F1:
• X330-OC12S1:
The ATM sub-modules can be installed in the following Avaya P330 Family
switches:
• Avaya P333T Hardware Version C/S 1.3 and higher, with Embedded S/W 2.4
and higher.
Note: The ATM Expansion Sub-module cannot be used in Avaya P333T hardware
Versions lower than C/S 1.3.
• Avaya P334T Embedded S/W Ver. 2.4 and higher.
• Avaya P332MF Embedded S/W Ver. 3.0 and higher.
• Avaya P333R Embedded S/W Ver. 2.4 and higher.
Refer to the Avaya X330 ATM Access Module User's Guide for installation
procedures.
The multimode Avaya X330-OC12F1 and X330-OC3F1 (future) ATM sub-modules
are Class 1 LED products. The single-mode X330-OC12S1 ATM sub-module is a
Class 1 Laser product. They comply with EN 60825-1 and Food and Drug
Administration (FDA) 21 CFR 1040.10 and 1040.11.
The sub-modules must be operated under recommended operating conditions.

Safety Information

Single-mode Module Laser Classification
LASER PRODUCT
Note: Class 1 lasers are inherently safe under reasonably foreseeable conditions of
operation.
Caution: The use of optical instruments with this product will increase eye hazard.
132
500m, Multimode fiber, can also be OC-3 reduced range
15 km, Single-mode fiber, can also be OC-3
CLASS 1
Avaya P333T User's Guide